AJ977XF+ Anti-Jamming Multi-Constellation Triple-Band Antenna
Anti-Jam Triple-Band Antenna with XF+ Channel-Split Filtering
56 products
Anti-Jam Triple-Band Antenna with XF+ Channel-Split Filtering
Two-Element Controlled Reception Pattern Antenna for Jammed Environments
Triple-band GNSS antenna with L-band corrections: GPS L1/L2/L5, GLONASS, Galileo, BeiDou and NavIC, 37 dB gain and 2.5 dB noise figure.
Embedded Full-Band Antenna Covering Every GNSS Constellation
Robust Antenna for Autonomous Vehicles, Precision Agriculture, and More
1-to-2 GNSS and L-band signal splitter (1–2 GHz) with 1 dB insertion loss in an IP67 aluminium housing, to share one antenna between two receivers.
Full-Band Anti-Jam Antenna for Marine and Mission-Critical Positioning
Four-Element CRPA with eXtended Filtering for Hostile RF Environments
Low Elevation Angle Nulling Against Ground-Based Jammers
Dual-Band GNSS Antenna for Precision Positioning Across Multiple Constellations
Pre-filtered dual-band GNSS antenna for GPS L1/L2, GLONASS G1/G2, Galileo E1 and BeiDou B1, with 35 dB gain and 2.5 dB noise figure.
Tactical-grade GNSS/INS with a jamming- and spoofing-resilient receiver: 0.03° roll/pitch, 0.08° heading and 1 cm RTK; suspended mounting version.
Four-Element Controlled Reception Pattern Antenna for Contested Environments
Pre-Filtered Single-Band GNSS Antenna for Noisy RF Environments
Embedded Passive Triple-Band Antenna with L-Band Correction Support
Accutenna® Anti-Jam Single-Band Antenna for Precision Positioning
Accutenna® Anti-Jam Antenna with Dual-Feed Interference Rejection
Smart Power Splitter for Fault-Tolerant Performance in Critical Systems
Smart 1-to-2 GNSS signal splitter for high-availability systems, letting two receivers share one antenna across the full GNSS spectrum.
Embedded Triple-Band Antenna with eXtended Filtering
Triple-band GNSS helical antenna with L-band and XF filtering: GPS L1/L2/L5, GLONASS, Galileo, BeiDou and NavIC, 2.5 dB noise figure.
Dual-band GNSS helical antenna with L-band: GPS L1/L2, GLONASS, Galileo and BeiDou, 28 dB gain and 2 dB noise figure, for UAVs and compact platforms.
Multi-Band GNSS with RTK and IMU for Centimeter-Level Accuracy
Enhanced Signal Clarity with Advanced Filtering and Low Noise
40 dB inline RF amplifier for all GNSS and L-band signals (1200–1800 MHz) with a 2 dB noise figure in a waterproof housing, for long antenna cable runs.
25 dB inline amplifier for upper-band GNSS (1559–1610 MHz) with SAW filtering and a 2 dB noise figure, waterproof, for long antenna cable runs.
Bias-tee that injects 5 V DC into coax (0.5–3 GHz) with 1 dB insertion loss and up to 450 mA, IP67, for powering active GNSS antennas.
Tactical-grade GNSS/INS with a jamming- and spoofing-resilient receiver: 0.03° roll/pitch, 0.08° heading and 1 cm RTK; rigid mounting version.
Embedded dual-band GNSS and Iridium helical antenna: GPS/QZSS L1/L2, GLONASS, Galileo and BeiDou, 28 dB gain and 1.7 dB noise figure.
42 g dual-band GNSS and active Iridium helical antenna: GPS/QZSS L1/L2, GLONASS, Galileo and BeiDou, 28 dB gain and 1.7 dB noise figure.
38 g smart helical GNSS antenna with a u-blox F9 engine (L1/L5), XF filtering, 0.3° heading and 7 Hz output, for high-accuracy UAVs.
Smart GNSS antenna with a u-blox F9 engine (L1/L2), 10 mm RTK, L-band PointPerfect corrections and 0.3° heading, for precise positioning and heading.
Smart GNSS timing antenna with a 72-channel u-blox M8 engine, GPS, GLONASS, BeiDou and Galileo, RS-422 timepulse, for network synchronisation and tracking.
Dual-antenna GNSS compass board: 0.16° heading, multi-frequency GPS, GLONASS, BeiDou and Galileo, RTK and Atlas L-band, 10 Hz (20 Hz option).
Vector GNSS compass receiver for marine heading and positioning: 0.2° heading, RTK and Atlas L-band, GPS, GLONASS, BeiDou and Galileo, 10 Hz output.
Durable IP67 Design for Reliable GNSS Performance in Tough Environments
Hemisphere GNSS A631 GNSS Smart Antenna offers professional-level accuracy for a wide range of applications, including agriculture, marine, GIS, and mapping.
Vector GNSS smart antenna with 1.5° heading (0.75° optional) and 1.5° pitch/roll, GPS, GLONASS, BeiDou, Galileo and QZSS at 10 Hz, for marine and machine use.
Multi-frequency GNSS smart antenna with Athena RTK (8 mm + 1 ppm static) and Atlas L-band corrections, for survey, construction and machine control.
GNSS antenna for GPS L1, GLONASS G1, BeiDou B1, Galileo E1, SBAS and L-band, with 30 dB LNA gain and an aluminium base, for marine and machine use.
Hemisphere GNSS Vector VR500 GNSS Smart Antenna provides RTK-level precision and reliable heading for machine control and challenging applications.
Lightweight 40 g multi-frequency helical GNSS antenna for UAVs: GPS L1/L2, GLONASS, BeiDou, Galileo and L-band, 30 dB LNA and over 50 dBc out-of-band rejection.
Multi-frequency GNSS antenna (L1/L2/L5) with L-band, 30 dB LNA gain and a 5/8-inch mount, built for precise machine control.
Multi-frequency GNSS antenna (L1/L2/L5) with L-band, 30 dB LNA gain and a 5/8-inch mount, for land and marine positioning.
Multi-frequency GNSS antenna (L1/L2/L5) with L-band, 30 dB LNA gain, rugged Lexan radome and 1-inch mount, for precise RTK positioning.
Compact 0.38 kg multi-frequency GNSS antenna (L1/L2/L5) with L-band and 30 dB LNA gain, for construction survey, RTK and machine control.
GNSS antennas for GPS L1, GLONASS G1, BeiDou B1, Galileo E1, SBAS and L-band, 0.38 kg with a 5/8-inch mount, for precision positioning.
Multi-frequency GNSS receiver with Athena RTK and Atlas L-band, 0.2° heading at 0.5 m baseline and 10 Hz (20 Hz option), for survey and machine control.
Hemisphere GNSS Universal Development Kit ST for OEM Boards is designed to streamline the integration and evaluation of Phantom and Vega OEM boards.
DGPS beacon OEM board: 2-channel 283.5–325 kHz beacon receiver with RTCM output, 0.25 W and 30 g, for differential GPS corrections.
Multi-frequency GNSS OEM boards with aRTK, Atlas L-band and up to 50 Hz output, 8 mm RTK accuracy, 1.8 W and 22 g, for system integrators.
4-channel anti-jamming GNSS system with a CRPA antenna: over 40 dB jamming suppression by beam nulling, feeding clean signals to standard receivers.
Anti-spoofing GNSS receiver for defence and aerospace: GPS, GLONASS and BeiDou, 10 Hz, 150 g and 28 V, with ECCM measures against interference.